Log Home Staining
When choosing a stain for your home it is important to remember that logs and heavy timbers have a completely different dynamic than thinner sidings and trim. Their physics, if for nothing more than size and movement, makes it important for us to choose coating that will adapt to those attributes. At LogDoctors, we use a variety of different types of stains from a number of manufacturers.

Log Home Staining By LogDoctors

Log Home Staining By LogDoctors

Log Home Staining By LogDoctors

Log Home Staining By LogDoctors

Log Home Staining By LogDoctors

Log Home Staining By LogDoctors

Log Home Staining

Log Home Staining

Log Home Staining Products
Experience has shown us that each one of our projects is different, and being able to draw from a variety of stains, instead of just one type, will make for a better end product. No matter what you are told, no one manufacturer can meet every need, with the product line they produce. If stains are to be broken into various types, we should probably start with the most basic of considerations, clean-up. If we start here, of all stains, there are going to be two forms. Those stains that clean up with soap and water, and those stains that clean up with a solvent like mineral spirits.

We could have said that those types could be water-borne and oil-based, but some of the newer oil emulsions clean up with soap and water while they are still wet. All the stain systems we use, they are systems because the majority require multiple coats of multiple types of product, are surface film coat stains (water-borne), or shallow penetrating stains (oil based or oil emulsion).

LOGDOCTORS WILL NOT WARRANT THE APPLICATION OF DEEP PENETRATING OIL BASED STAINS.

These surface and shallow penetrating systems have been on the market now for a couple of decades, and the ones we use have proven track record for longevity and protection for your home. We have a variety of criteria that we use when evaluating your particular property to help educate you in choosing the correct product for your home. We’ll discuss two major factors in this article. The first has a lot to do with what is on the logs already. If you have been using a deep penetrating stain, and only plan you wash your logs, you are held to a fairly short list of oil-based products that will be compatible with what has already been applied.

With some deep penetrators, this is even true if you media blast. If you’ve been using a surface film-coat system, your options are much larger. Most shallow penetrating oil and oil emulsions are compatible with the film coat systems, but not the reverse. The film-coat systems can be particular to what they will stick too. Even though we have been doing this for years, we always check with the manufacturer for compatibility issues before applying one stain over another. Secondly, location also factors into the type of stains we choose for homes.

We are a lot more likely to choose a film coat system for homes that are more in the open and have good air circulation around them than one that is deep in a holler or draw or one in a very damp environment. Our experience shows that film-coat systems have a longer life span on homes that have adequate air movement around them, where oils will work in both damp and dry environments. There are other factors that go into stain choice, including how the dwelling is to be prepped, color to be used, difficulty of maintenance, etc . . ., but these discussions can be long and drawn out, and are best discussed in person. So please feel free to call us at any time with questions you may have.



Main Menu

Log Home Staining
For Assistance: ( 865) 606-0586
Log Home Staining
poweredby makatary